USA Staffing

Position Title: Supervisory Interdisciplinary Engineer
Agency: U.S. Army Corps of Engineers
Announcement Number: SCGU199739222781EA Opens in new window
Open Period: Wednesday, September 11, 2019 to Wednesday, September 11, 2019

For preview purposes only. To apply, please return to the USAJOBS announcement and click the Apply button.

1. Do you claim Veterans' Preference?

A. No, I do not claim Veterans' Preference

B. 0-point Sole Survivorship Preference (SSP)

C. 5-point preference based on active duty in the U.S. Armed Forces (TP)

D. 10-point preference for non-compensable disability or Purple Heart (XP)

E. 10-point preference based on a compensable service connected disability of at least 10% but less than 30% (CP)

F. 10 point preference based on widow/widower or parent of a deceased veteran, or spouse or parent of a disabled veteran (XP)

G. 10-point preference based on a compensable service connected disability of 30% or more (CPS)

2. Interagency Career Transition Assistance Plan

Are you a current or former federal employee displaced from a position in a federal agency other than the agency hiring for this position? If yes, confirm:

• you are located in the same local commuting area of the vacancy

• your grade is equivalent to or below the grade level of the vacancy and

• your last performance rating of record is at least fully successful or the equivalent.

ICTAP applicants must be well qualified for the position to receive consideration for special priority selection. Well-qualified is defined as meeting all of the minimum qualification standards and eligibility requirements as well as possessing skills that clearly exceed the minimum qualification requirements for the position.

*Note: Under competitive delegated examining, an ICTAP eligible will be considered well-qualified if they attain an eligibility rating of 90 or higher, not including points for veterans' preference.

Supporting documentation: Federal employees seeking ICTAP eligibility must submit proof that they meet the requirements of 5 CFR 330.704, by submitting a copy of the following documents with your completed application: A copy of your agency notice; AND,

A copy of your most recent annual performance appraisal; AND,

A copy of your most recent SF-50 noting current position, grade level, and duty location. Additional information regarding ICTAP eligibility can be found in the OPM Employee's Guide to Career Transition. For more information, review the USAJOBS Resource Center.

A. Yes

B. No

3. This position is supervisory as defined by the Office of Personnel Management's (OPM) General Schedule Supervisory Guide (GSSG). A one year probation to assess your ability to perform supervisory duties is required unless previously completed. Are you willing to serve a one year supervisory probation period?

A. Yes

B. No

1. Select all of the series you want to be considered for. You must choose at least one series.

A. 0810 - Civil Engineering

B. 0830 - Mechanical Engineering

C. 0850 - Electrical Engineering

2. Would you accept a term appointment?

A. Yes

B. No

This position has requirements which must be met prior to employment, and conditions for continued employment. Your answers to the questions in this section will indicate your understanding of, or possession of, these requirements and conditions.

1. You must meet the position requirements for DAWIA certification in the Career Field Contracting at Level II within 24 months of employment. Are you willing to meet the DAWIA Certification requirements for the Career Field Contracting Level II within 24 months?

A. Yes

B. No

2. This position is supervisory as defined by the Office of Personnel Management's (OPM) General Schedule Supervisory Guide (GSSG). A one year probation to assess your ability to perform supervisory duties is required unless previously completed. Are you willing to serve a one year supervisory probation period?

A. Yes

B. No

Thank you for your interest in a Supervisory Interdisciplinary position with the Department of the Army. Your resume and the responses you provide to this assessment questionnaire will be used to determine if you are among the best qualified for this position. Your responses are subject to verification. Please review your responses for accuracy before you submit your application.

1. Select the one statement that best describes the education that you possess that demonstrates your ability to perform the work of Supervisory Interdisciplinary Engineer at the GS-13 grade level or equivalent pay band in the Federal Service.

A. I have a bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcripts.)

B. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Note: You must attach a copy of your transcripts, AND proof of registration as an Engineer Intern (EI) or Engineer in Training (EIT) or copy of your Professional Engineer (PE) license.)

C. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. (Note: You must attach a copy of your transcripts, AND proof of passing the Fundamentals of Engineering (FE) examination or other written test required for professional registration.)

D. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed at least 60 semester hours or 90 quarter hours of courses in the physical, mathematical, and engineering sciences that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. (Note: You must attach a copy of your transcripts.)

E. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, and have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Note: You must attach a copy of your transcripts.)

F. My education and/or experience is not reflected in the above statement.

Select “Yes” or “No” to the following question(s).

2. This position has selective placement factor which must be met prior to employment and for continued employment. This position requires registration or licensure in Professional Engineering. Registration may be in any state, Guam, Puerto Rico, or the District of Columbia. (NOTE: You must provide/upload your Professional Engineer License as proof of claimed registration/license.)

A. Yes

B. No

3. Select the one statement that best describes the experience that you possess that demonstrates your ability to perform the work of a Supervisory Interdisciplinary Engineer at the GS-13 grade level or equivalent pay band in the Federal Service.

A. I have one year of specialized experience equivalent to the GS-12 grade level in the Federal service which includes 1) : Provides subordinate direction and oversees the inspection of construction operations; (2) Reviewing project plans for a variety of complex and unique facilities located at military installations and some civil works projects; (3) Maintaining surveillance over the project layout. (4) Directing inspection of construction operations for compliance with intent of design. (5) Interpreting plans, field inspection, observing and investigating construction at all stages, pay estimate data, required work schedules, certificates and test results on equipment and materials and enforcing safety provisions.

B. My experience is not reflected in the above statement.

4. Your responses to the Announcement and Assessment Questionnaires, along with your resume and all supporting documentation are subject to evaluation and verification to ensure accuracy. Please take this opportunity to review your responses to ensure their accuracy.

A. Yes, I verify that all of my responses to this questionnaire are true and accurate. I accept that if my supporting documentation and/or later steps in the selection process do not support one or more of my responses to the questionnaire that my application may be rated lower and/or I may be removed from further consideration.

B. No. I do not accept this agreement and/or I no longer wish to be considered for this position.

Your session will expire due to inactivity in 60 seconds.

Unsaved data may be lost if you allow this session to expire.

Warning! The announcement has now closed.

Failure to continue will prevent you from completing and submitting the application.

Click the Stay Connected button below to continue your session.

Terms & Conditions

Your Session is About to Expire!