USA Staffing

Position Title: Interdisciplinary
Agency: U.S. Army Corps of Engineers
Announcement Number: CERG244372397203HWS Opens in new window
Open Period: Tuesday, October 8, 2024 to Tuesday, October 7, 2025

For preview purposes only. To apply, please return to the USAJOBS announcement and click the Apply button.

1. Do you claim Veterans’ Preference?

A. No, I do not claim Veterans' Preference

B. 0-point Sole Survivorship Preference (SSP)

C. 5-point preference based on active duty in the U.S. Armed Forces (TP)

D. 10-point preference for non-compensable disability or Purple Heart (XP)

E. 10-point preference based on a compensable service connected disability of at least 10% but less than 30% (CP)

F. 10 point preference based on widow/widower or parent of a deceased veteran, or spouse or parent of a disabled veteran (XP)

G. 10-point preference based on a compensable service connected disability of 30% or more (CPS)

1. Select the lowest grade you are willing to accept for this position.

2. Select the series you want to be considered for. You must choose at least one series.

A. 0808 - Architecture

B. 0810 - Civil Engineering

C. 0819 - Environmental Engineering

D. 0830 - Mechanical Engineering

E. 0850 - Electrical Engineering

F. 1350 - Geology

Thank you for your interest in an Interdisciplinary - Civil Engineer, Mechanical Engineer, Electrical Engineer, Architect, or Geologist position with Department of the Army. Your resume and the responses you provide to this assessment questionnaire will be used to determine if you are among the best qualified for this position. Your responses are subject to verification. Please review your responses for accuracy before you submit your application.

1. Select the one statement that best describes the education that you possess that demonstrates your ability to perform the work of an Architect at the GS-11/12 grade level or equivalent pay band in the Federal Service.

A. I have a bachelor's degree (or higher) in architecture, or a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. (Note: You must attach a copy of your transcripts.)

B. I have a combination of education and experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. I have a degree in architectural engineering which provided the knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in A above. (Note: You must attach a copy of your transcripts.)

C. I have a combination of education and experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. I have one year of experience working in an architect’s office or in architectural work, which provided me with a thorough knowledge of the fundamental principles and theories of professional architecture, for each year short of graduation from a program of study in architecture. In the absence of college courses, I have five years of such experience. (Note: You must attach a copy of your transcripts.)

D. My education and/or experience is not reflected in the above statement.

2. Select the one statement that best describes the education that you possess that demonstrates your ability to perform the work of a Civil Engineer, Mechanical Engineer, or Electrical Engineer at the GS-11/12 grade level or equivalent pay band in the Federal Service.

A. I have a bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcripts.)

B. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Note: You must attach a copy of your transcripts, AND proof of registration as an Engineer Intern (EI) or Engineer in Training (EIT) or copy of your Professional Engineer (PE) license.)

C. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. (Note: You must attach a copy of your transcripts, AND proof of passing the Fundamentals of Engineering (FE) examination or other written test required for professional registration.)

D. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed at least 60 semester hours or 90 quarter hours of courses in the physical, mathematical, and engineering sciences that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. (Note: You must attach a copy of your transcripts.)

E. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, and have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Note: You must attach a copy of your transcripts.)

F. My education and/or experience is not reflected in the above statement.

3. Select the one statement that best describes the education that you possess that demonstrates your ability to perform the work of Geologist at the GS-11/12 grade level or equivalent pay band in the Federal Service.

A. I have a bachelor’s degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography. (Note: You must attach a copy of your transcripts.)

B. I have a combination of education and experience which includes course work as shown in A above, plus appropriate experience or additional education. (Note: Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant’s professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.) (Note: You must attach a copy of your transcripts.)

C. I do not possess the education described above.

4. Select the one statement that best describes the education and/or experience that you possess that demonstrates your ability to perform the work of an Architect, Civil Engineer, Geologist, Mechanical Engineer, or Electrical Engineer at the GS-11 grade level or equivalent pay band in the Federal Service.

A. I have one year of specialized experience equivalent to at least the GS-09 grade level in the Federal service which includes assisting with the review of engineering design plans and/or specifications for accuracy; preparing design features for civil works projects, such as contract plans, specifications, and as-built drawings; and collaborating with personnel from various organizations to complete assigned projects.

B. I have successfully completed a Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to perform the work of the position. (Note: You must attach a copy of your transcripts.)

C. I have the specialized experience as described in A, but less than one year; and I have at least two years of graduate education as described in B, but less than the required three years. I have computed the percentage of the requirements that I meet, and the total is at least 100% (To compute the percentage, divide your total months of qualifying experience by 12. Then, divide your semester hours of graduate education beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. The total percentage must equal at least 100 percent to qualify.). (Note: You must attach a copy of your transcripts.)

D. I have the experience as described in A AND the education described in B. (Note: You must attach a copy of your transcripts.)

E. My experience and/or education is not reflected in any of the above statements.

5. Select the one statement that best describes the experience that you possess that demonstrates your ability to perform the work of an Architect, Civil Engineer, Geologist, Mechanical Engineer, or Electrical Engineer at the GS-12 grade level or equivalent pay band in the Federal Service.

A. I have one year of specialized experience equivalent to at least the GS-11 grade level in the Federal service which includes assembling plan drawings, plan specifications, comfortable working with ecosystems, levee repair, and hazardous waste analysis. Provide leadership in analyzing specifications for accuracy; preparing design features for civil works projects, such as contract plans, specifications, and as-built drawings; providing technical guidance on design memoranda and final plans prepared; and serving as project manager or technical lead on engineering projects.

B. My experience is not reflected in the above statement.

6. Your responses to the Announcement and Assessment Questionnaires, along with your resume and all supporting documentation are subject to evaluation and verification to ensure accuracy. Please take this opportunity to review your responses to ensure their accuracy.

A. Yes, I verify that all of my responses to this questionnaire are true and accurate. I accept that if my supporting documentation and/or later steps in the selection process do not support one or more of my responses to the questionnaire that my application may be rated lower and/or I may be removed from further consideration.

B. No. I do not accept this agreement and/or I no longer wish to be considered for this position.

Your session will expire due to inactivity in 60 seconds.

Unsaved data may be lost if you allow this session to expire.

Warning! The announcement has now closed.

Failure to continue will prevent you from completing and submitting the application.

Click the Stay Connected button below to continue your session.

Terms & Conditions

Your Session is About to Expire!