To verify your eligibility, you must submit a copy of your latest Certificate of Release or Discharge from Active Duty, DD-214 (copy indicating character of service) or other proof of your service which includes character of service. You must also submit the disability letter from the Department of Veterans Affairs or Armed Service and the Application for 10-Point Veteran Preference, Standard Form 15.
(limit characters)
3.
1. Are you the spouse of a member of the armed forces serving on active duty?
-OR-
2. Are you a spouse of a 100 percent disabled service member injured while on active duty?
-OR-
3. Are you the un-remarried widow or widower of a member of the Armed Forces killed while in active duty status?
Toverify your eligibilityforoption1 identified above, you must submit documentation verifying active duty status; and documentation verifying marriage to the member of the armed forces (i.e., a marriage certificate or other legal documentation verifying marriage).
To verify your eligibility for options 2 and 3 identified above, you must submit the Application for 10-Point Veteran Preference, Standard Form 15 and all supporting documentation identified on that document (e.g., Certificate of Release or Discharge from Active Duty, DD-214 (copy indicating character of service) or other proof of service which includes character of service; death certificate and documentation identifying marital status at the time of death; disability letter from the Department of Veterans Affairs or Armed Service, etc..
(limit characters)
4.
Are you a current or former federal employee displaced from the agency hiring for this position? If yes, confirm:
you are located in the same local commuting area of the vacancy; AND,
you are applying to a position that is at or below the grade level of the position from which you were or will be separated; AND,
you are applying to a position that does not have greater promotion potential than the position from which you were or will be separated; AND,
your last performance rating of record is at least fully successful or the equivalent.
To verify your eligibility, you must submit supporting documentation such as a Reduction in Force (RIF) separation notice or a Proposed Removal/Separation notice to include your latest performance rating (if the notice does not have this information included, you must submit a copy of your most recent performance appraisal) and a copy of your latest Notification of Personnel Action, Standard Form 50.
(limit characters)
5.
Do you meet one of the following Competitive Merit Promotion Eligibilities:
Current Federal or former employees with career or career- conditional appointments in the competitive service that hold, or have held a career or career-conditional position at a lower grade level as the position being announced; or,
To verify your eligibility, you must submit supporting documentation. For example, a copy of your latest Notification of Personnel Action, Standard Form 50 (SF-50) or equivalent personnel action form reflecting your competitive status or a copy of your latest Certificate of Release or Discharge from Active Duty, DD-214 (copy indicating character of service) or other proof of your service which includes character of service. All required documentation will be outlined in the Job Opportunity Announcement.
(limit characters)
6.
Are you a former member of the Public Lands Corps (PLC) who has served the time required for completing a PLC project carried out on Federal land within the preceding 2 years (an individuals eligibility for NCE under this authority shall not exceed 2 years after completion of his/her last PLC project), and:
• Served as a qualified youth on an appropriate conservation project completing a minimum of 640 hours of satisfactory service that included at least 120 hours through the PLC (individuals must provide a copy of the "Certificate of Eligibility for NCE Hiring Based on PLC Service" and the complete PLC Participant Work Hours Verification Form with your application package in order to be considered under this hiring authority), and
• Meet OPM qualification standards and any other qualification requirement(s) stated in this vacancy announcement for the position in which you are applying.
(limit characters)
7.
Are you a current or former federal employee displaced from a position in a Federal agency other than the agency hiring for this position? If yes, confirm:
you are located in the same local commuting area of the vacancy; AND,
you are applying to a position that is at or below the grade level of the position from which you were or will be separated; AND,
you are applying to a position that does not have greater promotion potential than the position from which you were or will be separated; AND,
your last performance rating of record is at least fully successful or the equivalent.
To verify your eligibility, you must submit supporting documentation such as a Reduction in Force (RIF) separation notice to include your latest performance rating (if the notice does not have this information included, you must submit a copy of your most recent performance appraisal) and a copy of your latest Notification of Personnel Action, Standard Form 50.
(limit characters)
8.
Are you a current or former employee of a land management agency (Forest Service; Bureau of Land Management; National Park Service; Fish and Wildlife Service; Bureau of Indian Affairs; or Bureau of Reclamation) who:
was originally hired to a time-limited position under a competitive appointment; and,
served one or more time-limited appointments at a land management agency for a period totaling more than 24 months without a break in service of two or more years; and,
performed at an acceptable level of service during each period of service; and,
if no longer employed by the land management agency, have been separated for no more than two years, and departed that position in good standing.
To verify your eligibility, you must provide documentation for the Land Management Workforce Flexibility Act (LMWFA) eligibility, which includes ALL Appointment AND Termination SF-50s for EACH appointment as well as ALL performance evaluations, for each qualifying period of temporary employment claimed.
For more information, review Land Management Workforce Flexibility Act (LMWFA).
(limit characters)
9.
Are you a former Peace Corps volunteer or VISTA member who has completed your service within the past twelve months?
-OR-
Are you a former Peace Corps volunteer or VISTA member who has completed your service within the past 36 months and are requesting an extension of your non-competitive eligibility due to your military service, status as a full-time student or other experience related to this position?
-OR-
Are you a current or former Peace Corps employee who has completed at least 36 months of continuous service and has been separated from the Peace Corps for less than three years?
To verify your eligibility, you must submit a copy of your description of service or other proof of non-competitive eligibility. If you are a former Peace Corps volunteer or VISTA member who is requesting an extension of your non-competitive eligibility, please also provide the necessary documentation to support your request.
(limit characters)
10.
Do you meet one of the following Non-Competitive Merit Promotion Eligibilities:
Disabled veteran receiving 30% or more disability compensation from the VA;
Transfer, reassignment or reinstatement eligible: current Federal or former employee with career or career-conditional appointment in the competitive service that hold, or have previously held a career or career-conditional position at the same or higher grade level with the same or higher promotion potential as the position being announced; or,
Individual eligible under other non-competitive appointment authorities such as: Veterans Recruitment Authority; Military spouses under E.O. 13473; Certain former overseas employees; Present and former Peace Corps, Vista or Action volunteers; Former White House staff; Present and former Foreign Service officers and employees; Certain National Guard technicians; Schedule A; OPM Interchange Agreement and Other Miscellaneous Authorities.
To verify your eligibility, you must submit supporting documentation. For example, a copy of your latest Certificate of Release or Discharge from Active Duty, DD-214 (copy indicating character of service) or other proof of your service which includes character of service; a copy of your Notification of Personnel Action, Standard Form 50 (SF-50); etc. All required documentation will be outlined in the Job Opportunity Announcement.
(limit characters)
11.
Are you a current Excepted Service employee of a Federal Agency that has a valid interchange agreement with the Office of Personnel Management?
To verify your eligibility, you must submit a copy of your Notification of Personnel Action, Standard Form (SF-50) reflecting your status.
(limit characters)
12.
Do you have a severe physical, psychiatric or mental disability that qualifies you for a Schedule A Disability appointment?
To verify your eligibility, you must provide appropriate medical documentation, i.e., a letter signed by a licensed medical professional or licensed vocational rehabilitation specialist stating your condition and restriction
(limit characters)
13.
Are you a veteran whose latest discharge was under honorable conditions AND you:
served three or more years of continuous active duty service in the military (Note: if released shortly before completing a 3-year tour, you are considered to meet the eligibility); OR,
To verify your eligibility, you must submit a copy of your latest Certificate of Release or Discharge from Active Duty, DD-214 (copy indicating character of service) or other proof of service which includes character of service.
(limit characters)
14.
Are you a veteran who separated from active duty under honorable conditions and you:
recently separated (within the past 3 years)
are a disabled veteran
served on active duty during a war, campaign or expedition OR
received an Armed Forces Service Medal
If eligible, submit a copy of your latest Certificate of Release or Discharge from Active Duty, DD-214 (copy indicating character of service) or other proof of your service which includes character of service. If claiming disability preference, provide the disability letter from the Department of Veterans Affairs or Armed Service and the Application for 10-Point Veteran Preference, Standard Form 15.
.
A review of your resume and supporting documentation will be made and compared against your responses to the Assessment Questionnaire to determine if you are qualified for this job. If your resume is incomplete or does not support the responses provided in the Assessment Questionnaire, or if you fail to submit all required documentation, you will be rated 'ineligible', 'not qualified', or your score will be adjusted accordingly. If a determination is made that you have inflated your qualifications or experience, you can lose consideration for this position. Please follow all instructions carefully; errors or omissions can affect your rating.
(limit characters)
1.
INSTRUCTIONS: Must reside in local commuting area (LCA) of Sleeping Bear Dunes National Lakeshore (SLBE), Empire, Michigan (except for VEOA candidates) to be eligible for this position. LCA includes any population center (or two or more neighboring ones) and the surrounding localities in which people live and can reasonably be expected to travel back and forth daily to their usual employment. The local commuting area will extend to a 75-mile radius from SLBE.
(limit characters)
Performance
1.
My performance is at an acceptable level and I am not serving under a formal Performance Improvement Plan (PIP).
(limit characters)
Assessment 1
.
Thank you for your interest in the Sign Painter WG-4104-09 position. Your responses to this questionnaire in conjunction with other portions of your completed application may be evaluated to determine your qualifications. The resume or application materials you submit must support your answers you provide on the questionnaire. If they do not, you may be found not qualified, or you may be placed in a lower quality category. Please carefully follow the instructions for each question.
(limit characters)
.
Ability to do the work of the position without more than normal supervision. (SCREEN OUT)
(limit characters)
1.
From the descriptions below select the one response that best describes how your experience/education meets the ability to do the work of the position without more than normal supervision for the Sign Painter, WG-4104-09 position. You must show that you meet the experience described below. Read all responses before making your selection. Any skill that you indicate you have experience with in the following occupational questionnaire must be specifically documented in your resume or application.
(limit characters)
2.
This position requires that the incumbent possess a Driver's License. From the descriptions below, select the one response that best describes how you meet this requirement. Read all of the responses before making your selection. MARK ONLY ONE RESPONSE. If you select more than one response, or leave this question blank you will be rated ineligible. If you do not meet these minimum qualifications, you will be considered ineligible and will not receive consideration for this position.
(limit characters)
.
Practices in Construction, Structure
(limit characters)
.
Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.
(limit characters)
3.
Design, fabricate, and install a wide range types and styles of routered or engraved wood, composite and metal signs
(limit characters)
4.
Perform periodic inventory of sign materials. Place orders as needed to maintain sufficient supplies.
(limit characters)
5.
Design, fabricate, and install a wide range types and styles of trail structures such as boardwalks, viewing platforms, bridges, staircases, and handrails.
(limit characters)
6.
Able to carry and lift materials in excess of 40 pounds, and up to 80 for short periods.
(limit characters)
7.
Designs and prepares sign projects and secures quotes
(limit characters)
.
Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.
(limit characters)
8.
Use of Vcarve Pro and Adobe Illustrator or similar programs to layout and design signs and program computerized routers.
(limit characters)
9.
Use industry standards and self-developed design systems that incorporate organizational or National Park branding and existing park design systems for letter spacing and sign layout to produce clear, functional signs that include complex graphics.
(limit characters)
10.
Skill in the use of computer (cnc) routing and engraving of text or graphics onto sign substrates.
(limit characters)
11.
Able to operate a desktop computer system and software such as Excel, Word and ArcGIS Geographic Information Systems to maintain an accurate database of existing park signs.
(limit characters)
12.
Able to compile GIS location data on park signs and maintained trail assets and then using that data to develop professional, readable maps for use with project planning and compliance.
(limit characters)
13.
Apply a variety of coating materials such as primers and paints using standard application techniques.
(limit characters)
.
Ability to Interpret Instructions, Specifications, etc. (other than blueprint reading)
(limit characters)
.
Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.
(limit characters)
14.
Accurately interprets generally accepted standards such as the Manual on Uniform Traffic Control Devices (MUTCD) or National Park Service Uniguide and branding standards and existing park design guides to design and fabricate new signs.
(limit characters)
15.
Able to effectively interpret instructions and directions for new versions of software such as ArcGIS and Vcarve Pro as needed.
(limit characters)
16.
Interpret work orders, sketches, drawings, technical orders and other specifications.
(limit characters)
17.
Follow instructions, directions, and guidance from supervisor when new tasks are assigned.
(limit characters)
.
Ability to use and maintain tools and equipment
(limit characters)
.
Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.
(limit characters)
18.
Use and maintain computerized (cnc) routers, welding equipment, drill presses, commercial planers and finish sanders
(limit characters)
19.
Utilizes common power and hand tools such as shovel, pick, spud-bar, post-hole digger, augers, drills, wrenches, and hand levels.
(limit characters)
20.
Use and maintain a variety of power saws such as circular saws, portable band saws, table saws, radial arm saws, panel saws, chop saws, jig saws
(limit characters)
21.
Use and maintain chainsaws, crosscut saws and pole saws
(limit characters)
.
Knowledge of Materials
(limit characters)
.
Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.
(limit characters)
22.
Ability to select proper sign materials from different types of wood, composites, acrylics, or other industry standard sign materials.
(limit characters)
23.
Ability to select proper sign posts from a variety of materials such as wood or metal.
(limit characters)
24.
Prepare and apply to interior and exterior surfaces, paint, stain or varnish to walls, bare wood, previously painted wood, masonry and metals.
(limit characters)
25.
Apply paint using spray, roller, and traditional brush work.
(limit characters)
26.
Select paints for their protective qualities (i.e., oil or latex, rust prevention, etc.).
(limit characters)
27.
Independently plans and purchases materials, equipment or tools needed for all sign manufacturing tasks
(limit characters)
.
Dexterity and Safety
(limit characters)
.
Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.
(limit characters)
28.
Adhere to sign shop safety standards and procedures by using personal protective equipment and the appropriate safety protocols for assigned tasks.
(limit characters)
29.
Operate small equipment such as skid steers, forklifts, aerial lifts or similar.
(limit characters)
30.
Operate pickups and stake bed trucks on park, county, state roads and federal highways.
(limit characters)
31.
Follow vehicle, machinery and jobsite safety procedures (lockout/tag out, walk around inspections, safety checklists, etc.)
(limit characters)
32.
Adhere to OSHA safety standards related to on the job safety such as use of ladders, Safety Data Sheets (SDS), fall protection, power tools, personal protective equipment and trip hazards.
(limit characters)
33.
Ability to organize and prioritize projects and work orders to achieve safety, quality efficiency and optics goals
(limit characters)
.
Ability to Instruct
(limit characters)
.
Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.
(limit characters)
34.
Teach and demonstrate sign installation maintenance methods and techniques
(limit characters)
35.
Teach and demonstrate proper use of tools and equipment.
(limit characters)
36.
Provide guidance to and keep lower graded employees informed of procedures, policies, written instructions, and other directives.
(limit characters)
This online application, powered by USA Staffing®, a U. S. Government information system, is to be used only in the manner authorized.
You are authorized to use this system’s menus, controls, and features to do any and all of the following as a job applicant or potential
job applicant, subject to any limitations that may be imposed, such as due dates, or any requirement that a particular assessment be
completed personally by the job applicant:
Prepare, complete, and submit application packages, questionnaires, and other assessments.
View, print, modify, and save questionnaires and assessment responses and documents.
View the status of application packages you have in progress and correspondence addressed to you.
You are prohibited from accessing or attempting to access this system or records it contains to access information about anyone who has not given
you permission to do so, because the data and documents on this system include Federal records that contain sensitive information protected by
various Federal statutes, including the Privacy Act, 5 U.S.C. § 552a.
You are also prohibited from attempting to access, view, upload, change, or delete information on this system in any manner not consistent with and
supported by its own menu options and controls, even if that information pertains to you. You are not permitted to modify the system, deny access to
the system, accrue system resources for unauthorized use, or otherwise misuse this system, and if you do so, or try to do so, you may face criminal,
civil, or administrative penalties.
If you use this system, that will be construed to mean you understand and agree to abide by these terms and constitutes unconditional consent to review,
monitor, record, audit, and take action by all authorized government and law enforcement personnel.
Your Session is About to Expire!
Your session will expire due to inactivity in 60 seconds.
Unsaved data may be lost if you allow this session to expire.
Warning! The announcement has now closed.
Failure to continue will prevent you from completing and submitting the application.
Click the Stay Connected button below to continue your session.