USA Staffing

Position Title: ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC
Agency: Air National Guard Units
Announcement Number: MN-12641531-25-115 Opens in new window
Open Period: Monday, December 16, 2024 to Monday, December 15, 2025

For preview purposes only. To apply, please return to the USAJOBS announcement and click the Apply button.

1. Do you claim Veterans’ Preference?

A. No, I do not claim Veterans' Preference

B. 0-point Sole Survivorship Preference (SSP)

C. 5-point preference based on active duty in the U.S. Armed Forces (TP)

D. 10-point preference for non-compensable disability or Purple Heart (XP)

E. 10-point preference based on a compensable service connected disability of at least 10% but less than 30% (CP)

F. 10 point preference based on widow/widower or parent of a deceased veteran, or spouse or parent of a disabled veteran (XP)

G. 10-point preference based on a compensable service connected disability of 30% or more (CPS)

2. All federal re-employable eligibles. Are you eligible to be re-employed as a federal employee?

To verify your eligibility, you must submit a copy of your most recent Notification of Personnel Action, Standard Form 50 (SF 50).

A. Yes

B. No

3. All on-board federal employees/technicians within the state for which you are applying (Title 32 and Title 5, Permanent and Excepted Indefinite). Are you a current on-board federal employee or technician within the state for which this position is being advertised?

To verify your eligibility, you must submit a copy of your most recent Notification of Personnel Action, Standard Form 50 (SF 50) reflecting your Tenure in Block 24 (1, 2,or 3).

A. Yes

B. No

4. All on-board National Guard Title 32 Excepted Technicians within the state for which you are applying (Title 32 Permanent and Excepted Indefinite). Are you a current on-board National Guard Title 32 Excepted Technician within the state for which this position is being advertised?

To verify your eligibility, you must submit a copy of your most recent Notification of Personnel Action, Standard Form 50 (SF 50) reflecting your Tenure in Block 24 (1, 2, or 3).

A. Yes

B. No

All current (nationwide) federal employees. Are you a current federal employee?

To verify your eligibility, you must submit a copy of your most recent Notification of Personnel Action, Standard Form 50 (SF 50) reflecting your Tenure in Block 24 (1 or 2).

A. Yes

B. No

6. US Citizens. Are you a US Citizen?

A. Yes

B. No

Respond to each of the following questions. For each question, choose the response that best represents your eligibility, employment and skills. Mark only one response for each question. Please note that your answers will be verified against the information you provided in your uploaded resume, documents and information provided by your references.

Select “Yes” or “No” to the following question(s).

1. Do you possess experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance?

A. Yes

B. No

2. Do you possess experience in the use of various precision measurement instruments and standard?

A. Yes

B. No

3. Do you possess experience or training with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods?

A. Yes

B. No

Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.

4. Do you possess experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups; Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference material?

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

E. I am considered an expert in performing this task. I have supervised performance of this task or am normally the person who is consulted by other workers to assist or train them in doing this task because of my expertise.

5. Do you possess experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards; Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment?

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

6. Do you possess comprehensive knowledge of operating electronic principles related to equipment which is combined and interrelated with other devices and complicated by a variety of multi-component assemblies and devices with intricate functional relationships to understand the interaction of other circuits which create a malfunction?

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

Select “Yes” or “No” to the following question(s).

7. Do you possess a minimum of 2 years as a certifying technician in a calibration laboratory, or equivalent?

A. Yes

B. No

Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.

8. Do you possess skill in the use of trade tools such as wire strippers, screwdrivers, drills, files, soldering irons and micro-soldering units?

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

9. Do you possess the ability to perform test and calibration in accordance with instructions and procedures which are often vague and incomplete?

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

10. Do you possess the ability to interpret and apply a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials to repair, test, align, and calibrate equipment which serves as test equipment or precision measurement standards and utilize electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment?

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

11. Do you possess skill in the use of various precision measurement instruments and standards as pulse generators, frequency counters, voltmeters and oscilloscopes, and to set up and operate such standards to align and calibrate the units serviced?

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

Select “Yes” or “No” to the following question(s).

12. Do you certify that all of your responses to this questionnaire are true and accurate; and do you accept that if your supporting documentation does not support one or more of your responses to the questionnaire that your application may be rated lower or you may be removed from further consideration?

A. Yes

B. No

Your session will expire due to inactivity in 60 seconds.

Unsaved data may be lost if you allow this session to expire.

Warning! The announcement has now closed.

Failure to continue will prevent you from completing and submitting the application.

Click the Stay Connected button below to continue your session.

Terms & Conditions

Your Session is About to Expire!