USA Staffing

Position Title: Lead Civil Engineer (Hydraulic)
Agency: U.S. Army Corps of Engineers
Announcement Number: CERG5829722094HWR Opens in new window
Open Period: Tuesday, February 4, 2025 to Monday, February 24, 2025

For preview purposes only. To apply, please return to the USAJOBS announcement and click the Apply button.

1. Do you claim Veterans’ Preference?

A. No, I do not claim Veterans' Preference

B. 0-point Sole Survivorship Preference (SSP)

C. 5-point preference based on active duty in the U.S. Armed Forces (TP)

D. 10-point preference for non-compensable disability or Purple Heart (XP)

E. 10-point preference based on a compensable service connected disability of at least 10% but less than 30% (CP)

F. 10 point preference based on widow/widower or parent of a deceased veteran, or spouse or parent of a disabled veteran (XP)

G. 10-point preference based on a compensable service connected disability of 30% or more (CPS)

This position has requirements which must be met prior to employment, and conditions for continued employment. Your answers to the questions in this section will indicate your understanding of, or possession of, these requirements and conditions.

1. Appointment to this position is subject to a background investigation to determine your suitability for Federal employment. Are you willing to submit the proper documentation to have a background investigation completed?

A. Yes

B. No

2. This position is supervisory as defined by the Office of Personnel Management's (OPM) General Schedule Supervisory Guide (GSSG). A one year probation to assess your ability to perform supervisory duties is required unless previously completed. Are you willing to serve a one year supervisory probation period?

A. Yes

B. No

Thank you for your interest in a Lead Civil Engineer (Hydraulic), GS-0810-13, position with the Department of the Army. Your resume and the responses you provide to this assessment questionnaire will be used to determine if you are among the best qualified for this position. Your responses are subject to verification. Please review your responses for accuracy before you submit your application.

1. Select the one statement that best describes the education that you possess that demonstrates your ability to perform the work of Lead Civil Engineer (Hydraulic) at the GS-13 grade level or equivalent pay band in the Federal Service.

A. I have a bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcripts.)

B. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Note: You must attach a copy of your transcripts, AND proof of registration as an Engineer Intern (EI) or Engineer in Training (EIT) or copy of your Professional Engineer (PE) license.)

C. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. (Note: You must attach a copy of your transcripts, AND proof of passing the Fundamentals of Engineering (FE) examination or other written test required for professional registration.)

D. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed at least 60 semester hours or 90 quarter hours of courses in the physical, mathematical, and engineering sciences that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. (Note: You must attach a copy of your transcripts.)

E. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, and have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Note: You must attach a copy of your transcripts.)

F. My education and/or experience is not reflected in the above statement.

2. Select the one statement that best describes the experience that you possess that demonstrates your ability to perform the work of Lead Civil Engineer (Hydraulic) at the GS-13 grade level or equivalent pay band in the Federal Service.

A. I have one year of specialized experience equivalent to at least the GS-12 grade level in the Federal service which includes 1) Designing physical and/or numerical modeling of hydrologic, hydraulic, river, coastal and environmental processes, AND 2) Providing technical solutions for hydraulic, hydrologic, river, coastal and environmental engineering studies and design projects, AND 3) Coordinating schedules, project quality and budgets with project managers.

B. My experience is not reflected in the above statement.

3. The Lead Civil Engineer (Hydraulic) position at the GS-13 level requires a current, active, valid, and unrestricted Professional Engineer (PE) License in the US, the District of Columbia, or a territory of the United States. You must possess a valid Professional Engineer License for this GS-13 position. Do you currently possess a valid Professional Engineer License or Professional Geologist by any state, the District of Columbia, or a territory of the United States?

A. I have a current, active, full, and unrestricted license as a Registered Professional Engineer (PE) and wish to be considered for this GS-13 position. (Note: You must attach a copy of your current valid license/certification. Failure to submit the license/certification will disqualify you from this position.)

B. I do not have a current, active, full, and unrestricted license as a Registered Professional Engineer (PE) and no longer wish to be considered for this position.

4. Your responses to the Announcement and Assessment Questionnaires, along with your resume and all supporting documentation are subject to evaluation and verification to ensure accuracy. Please take this opportunity to review your responses to ensure their accuracy.

A. Yes, I verify that all of my responses to this questionnaire are true and accurate. I accept that if my supporting documentation and/or later steps in the selection process do not support one or more of my responses to the questionnaire that my application may be rated lower and/or I may be removed from further consideration.

B. No, I do not accept this agreement and/or I no longer wish to be considered for this position.

Your session will expire due to inactivity in 60 seconds.

Unsaved data may be lost if you allow this session to expire.

Warning! The announcement has now closed.

Failure to continue will prevent you from completing and submitting the application.

Click the Stay Connected button below to continue your session.

Terms & Conditions

Your Session is About to Expire!