USA Staffing

Resume Reminder- Your resume must include the following information for each job listed:

Job title Duties (be as detailed as possible)
Month & year start/end dates (e.g. June 2007 to April 2008)
Full-time or part-time status (include hours worked per week)
Series and Grade, if applicable, for all Federal positions you have held

Please be aware that your answers will be verified against information provided on your resume. Be sure that your resume clearly supports your responses to all of the questions by addressing your work experience in detail.

Recommended: Even though we do not require a specific resume format, your resume must be clear so that we are able to fully evaluate your qualifications. To ensure you receive appropriate consideration, please list the duties you performed under each individual job title. If we are unable to match your experiences with the positions held, you may lose consideration for this vacancy. We cannot make assumptions regarding your qualifications.

Select the appropriate answer to each of the following questions based on your current level of experience that demonstrates your ability to perform the duties of this position. When answering the questionnaire, remember that your experience is subject to verification by investigation. You may be asked to provide specific examples or documentation of experience as proof to support your answers, or you may be required to verify a response by a practical demonstration of your claimed ability to perform a task.

Select “Yes” or “No” to the following question(s).

1. Does your resume support the General Experience criteria below?
Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work.

A. Yes

B. No

2. Does your resume support the Specialized Experience criteria below?
Experience or training leading to an extensive knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Extensive knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems. Extensive knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs.

A. Yes

B. No

Please read and respond to all the questions below. For each Competency / Knowledge, Skills, and Abilities (KSA's), choose the response below that best describes your experience and/or training. Mark only one response for each question. Please note that your answers will be verified against the information you provide in your resume or application and information your references provide.

Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided.

3. Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed. Improvises work when standard procedures do not apply.

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

E. I am considered an expert in performing this task. I have supervised performance of this task or am normally the person who is consulted by other workers to assist or train them in doing this task because of my expertise.

4. Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

5. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

6. Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.

A. I have not had education, training, or experience in performing this task.

B. I have had education or training in how to perform this task, but have not yet performed it on the job.

C. I have performed this task on the job. My work on this task was monitored closely by a supervisor or senior employee to ensure compliance with proper procedures.

D. I have performed this task as a regular part of a job. I have performed it independently and normally without review by a supervisor or senior employee.

For each item, select the one response that most accurately describes your current level of experience and capability using the scale below.

7. Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team."

A. I do not have experience or demonstrated capability in performing this activity, but I am willing to learn.

B. I have limited experience in performing this activity. I have had exposure to this activity but would require additional guidance, instruction, or experience to perform it at a satisfactory level.

C. I have a fair amount of experience and a fair amount of demonstrated capability in performing this activity. I can perform this activity satisfactorily but could benefit from additional guidance, instruction, or experience to perform this activity more effectively.

D. I have considerable experience and considerable demonstrated capability in performing this activity. I can perform this activity independently and effectively.

E. I have extensive experience and extensive demonstrated capability in performing this activity. I am considered an expert; I am able to train or assist others; and my work is typically not reviewed by a supervisor. I have received verbal and/or written recognition from others in carrying out this activity.

Select “Yes” or “No” to the following question(s).

8. Your responses in this Assessment Questionnaire are subject to evaluation and verification using your resume. Later steps in the selection process are specifically designed to verify your responses. Deliberate attempts to falsify information will be grounds for disqualifying you or for dismissing you from employment following acceptance. Please take this opportunity to review your responses to ensure their accuracy. If you fail to answer this question, you will be disqualified from consideration for this position. I certify that, to the best of my knowledge and belief, all the information included in this questionnaire is true, correct, and provided in good faith. I understand that if I make an intentional false statement, or commit deception or fraud in this application and its supporting materials, or in any document or interview associated with the examination process, I may be fined or imprisoned (18 U.S.C. 1001); my eligibilities may be cancelled, I may be denied an appointment, or I may be removed and debarred from Federal service (5 C.F.R. part 731). I understand that any information I give may be investigated. I understand that responding "No" to this item will result in my not being considered for this position.

A. Yes

B. No

Terms & Conditions

Your Session is About to Expire!