U.S. Pacific Fleet Logo
Position Title
PLASTIC FABRICATOR SUPERVISOR I
Agency
U.S. Pacific Fleet
Announcement Number
ST-12704767-25-JMP Opens in new window
Open Period
Friday, March 21, 2025 to Monday, March 31, 2025
For preview purposes only. To apply, please return to the USAJOBS announcement and click the Apply button.
Eligibilities
1. Do you claim Veterans’ Preference? (limit characters)
2. Are you a retired civil service federal employee seeking reemployment?

If yes, you are required to submit a copy of your retirement SF-50 (or equivalent). In addition, you must select another eligibility (e.g., Former Federal Employee, VEOA, etc.) for which you can claim on this job opportunity announcement.

Failure to select another eligibility will make you ineligible for consideration.

The Department of Defense (DoD) and Department of Navy (DON) policy on employment of annuitants will be used in determining eligibility of annuitants. Annuitants reemployed in the Department of Defense receive full annuity and salary upon appointment. They are not eligible for retirement contributions, to participate in the Thrift Savings Plan, nor to a supplemental or re-determined annuity for the reemployment period. Discontinued service retirement annuitants (i.e. retired under section 8336(d)(1) or 8416(b)(1)(A) of title 5, United States Code) appointed to the Department of Defense may elect to be subject to retirement provisions of the new appointment, as appropriate.

Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

(limit characters)
3. Are you a spouse of an Armed Forces service member who is appointable under Non-Competitive EO 13473 Civil Service Appointment of Military Spouses?

You are eligible if you:
  • Are married to an active duty service member who is ordered to active duty for more than 180 consecutive days OR
  • Are the spouse of a service member who is 100% disabled due to a service connected injury OR
  • Are an un-remarried widow or widower of a service member who was killed while on active duty.

You are required to support your claim with the documents below:

All military spouses must submit documentation verifying marriage to the service member (e.g., marriage certificate).
AND
If you are married to an active duty service member, documentation must include current military orders (e.g., statement of service) to support active duty service for more than 180 consecutive days
OR
If you are a spouse of a 100% disabled service member, documentation must include service member's DD-214 and 100% service disability (e.g., VA Letter)
OR
If you are an un-remarried widow or widower of a service member killed while on active duty, documentation must include verification of service member's death while on active duty (e.g., DD-1300).

NOTE:  Military spouses are eligible for one permanent noncompetitive appointment if eligible based on 100% disability due to service or as an un-remarried widow/widower of a service member killed while on active duty.

For more information please see OPM's Questions and Answers for Noncompetitive Appointment of Certain Military Spouses

Failure to provide documentation that fully supports your claim will result in a rating of ineligible.
(limit characters)
4. Are you currently employed as a permanent competitive service employee in the Command/UIC listed in the 'This job is open to' section at the top of the job opportunity announcement?

If you are:
  • Your Notification of Personnel Action, Standard Form 50 will show the UIC number in block 41 (e.g., "UIC:XXXXX) AND
  • Your Notification of Personnel Action, Standard Form 50 will reflect career or career-conditional: Tenure 1 or 2 in box 24 AND
  • Your Notification of Personnel Action, Standard Form 50 must reflect your status in the competitive service: Position Occupied is 1 in box 34 (unless you are on a permanent VRA appointment then it will show a 2 in box 34).

If you answer yes to this question, you are required to submit a copy of your most recent SF-50 showing you are employed at this command in the competitive service AND the SF-50 reflecting the highest grade held if not reflected on your most recent SF-50. Failure to submit this documentation with your application will result in a rating of ineligible. If you are serving on an excepted service veterans recruitment appointment (VRA) you must ALSO submit an SF-50 showing your conversion or appointment to the excepted service VRA appointment (Authority code in block 5-C will be J8M).

PLEASE NOTE: For GS positions, to be considered for a promotion, you must provide SF-50(s) that shows that you have held the next lower GS grade for at least one year. SF-50s that have an effective date within the past year (e.g., General Adjustment SF-50 from this year or Within Rate/Grade Increases (WRI/WGI) SF-50 within a year) do not clearly show that you meet the one-year time-in-grade requirement. That means if you submit an SF-50 that is dated within the last year, you must submit another SF-50 that is dated more than one year ago to clearly demonstrate you meet the time-in-grade requirements.

If you are a DoD employee, you can obtain a copy of your SF- 50(s) from MyBiz. Failure to provide documentation that fully supports your claim will result in a rating of ineligible.
(limit characters)
5. Are you a current or former federal employee displaced from a position in a federal agency other than the Department of Defense?

If yes, confirm:
  • You are located in the same local commuting area of the vacancy AND
  • You are applying to a position that is at (or below) the grade level of the position from which you were (or will be) separated AND
  • You are applying to a position that does not have greater promotion potential than the position from which you have been (or will be) separated AND
  • Your last performance rating of record is at least fully successful or equivalent.
If you answer yes to this question, you are required to submit supporting documentation to validate your claim for interagency career transition assistance including 1) a copy of your agency notice, 2) a copy of your most recent performance appraisal, AND 3) a copy of your most recent SF-50 or notification of personnel action that includes position, grade level, and duty location.

Failure to provide this documentation will result in a rating of ineligible. 
 
For more information, review the USAJOBS Resource Center.
(limit characters)
6. Are you a person with an intellectual disability, a severe physical disability, or a psychiatric disability as defined in 5 CFR 213.3102(u)? The Department of the Navy encourages persons with disabilities to apply!

If you answer yes to this question, you are required to submit a letter or certification from a physician, or local, state, or federal rehabilitation office. The letter/certification must be on office letterhead and clearly state your eligibility for the appointing authority under 5 CFR 213.3102 (u). A sample letter can be found here. Failure to submit this documentation with your application will result in a rating of ineligible. 

For more information, review USAJOBS Individuals with Disabilities resources.
(limit characters)
7. Are you the spouse of a relocating Armed Forces member?  If yes, please confirm the following:

I am a military spouse who is currently married to my active duty sponsor. I am exercising my preference eligibility for positions within the local commuting area of my sponsor's current duty station.  I certify that I have not accepted nor declined a permanent, continuing Federal or non-appropriated fund position in the local commuting area of our current duty location. 

NOTE 1:  Military spouses are eligible for one permanent noncompetitive appointment using their preference eligibility for the duration of the active duty sponsor's assignment to a permanent duty station, as long as the military spouse has not declined or accepted a permanent Federal or non-appropriated fund position in the commuting area of the sponsor's current duty location.  If you certify that you have not used your preference at your sponsor's current duty location and it is discovered to be untrue, you may be subject to loss of MSP and possible disciplinary action. 

NOTE 2:  Spouses may exercise their spouse preference and priority status through the application-based process up to 30 calendar days prior to the military sponsor's reporting date to the new duty station or upon relocation anytime thereafter during the sponsor's tour. Spouses who do not initially relocate with their sponsor cannot exercise spouse preference and priority status until they are actually residing in the commuting area of the sponsor's duty station.

NOTE 3:  You must include a completed copy of the UPDATED Military Spouse PPP Self-Certification Checklist found here along with the documents identified on the checklist to verify your eligibility for MSP. Acceptable documentation of your preference eligibility includes at a minimum: A copy of the PCS orders, and your marriage certificate or license.

Failure to provide this documentation will result in a rating of ineligible.
(limit characters)
Preferences
1. Where did you hear about this job? We know you saw this announcement on USAJOBS, but did you hear about it somewhere else first?

Please tell us where you first heard about this job.
(limit characters)
2. Are you a current or former political appointee as described under 5 U.S.C. sections 5312 through 5316 (relating to the Executive Schedule)?
OR
Are you a current or former Schedule A, Schedule C, or appointee who serves/served in a political capacity under agency-specific authority in the Executive Branch?
OR
Are you a current or former non-career SES, Limited Term SES, or Limited Emergency SES in the Executive Branch?
OR
Are you a current or former political appointee in the Executive Branch?

The Office of Personnel Management (OPM) must authorize employment offers made to current or former political appointees. A recent or former political appointee is defined as someone who held a political appointment covered by OPM's policy within the previous 5-year period. If you are currently employed, or have been employed within the last 5 years, in any one of the categories above, you must disclose this information. Failure to disclose this information could result in disciplinary action including removal from Federal Service.

For more information see https://www.chcoc.gov/content/political-appointees-and-career-civil-service-positions-4 and https://www.opm.gov/policy-data-oversight/oversight-activities/faqs/

If you answer Yes to this question, you must provide your current or past SF50 for the political appointment.
(limit characters)
3. I authorize my application information being shared with hiring managers for similar positions. I understand this option may not result in further consideration for additional positions nor will it impact my application for this announcement. (limit characters)
Conditions of Employment
1. I am willing and able to obtain and maintain a Secret security clearance. (limit characters)
2. I am willing and able to submit to a pre-employment physical exam prior to employment. (limit characters)
3. I am willing and able to use protective clothing and gear and observe safety precautions. (limit characters)
4. I am willing and able to work an uncommon tour of duty (may include weekend, nights, overtime, or holidays). (limit characters)
5. I am willing and able to work onboard ships. (limit characters)
6. This position requires that the selectee be willing and able to climb ladders and scaffolding. I am willing and able to climb ladders and scaffolding. (limit characters)
7. This position requires that the selectee have visual acuity and accurate color discrimination. I am able to distinguish between colors and shades of colors. (limit characters)
8. This position requires the performance of moderate to arduous physical exertion and/or duties of a hazardous nature. I am willing and able to undergo psychological and/or physical medical evaluations to verify my ability to perform the essential duties of this position efficiently without hazard to myself or others and determine physical suitability to perform the duties of this position. (limit characters)
9. I am willing and able to work in small and/or confined spaces. (limit characters)
10. I am willing and able to accept a supervisory position. (limit characters)
11. I am willing and able to work a Shift Work schedule. A Shift Work schedule describes work performed with varying and/or rotating shifts. (limit characters)
Assessment 1
1. Read all of the statements below, and then select the response based on your highest level of experience and/or training that demonstrates your ability to perform the duties of the position. (limit characters)
Select the one statement that most accurately describes your training and experience carrying out each task using the scale provided. (limit characters)
2. Install plastic items aboard ships or in buildings. (limit characters)
3. Install protective coverings for onboard or detached equipment and structures. (limit characters)
4. Lead coworkers in the fabrication, repair, assembly, and installation of fabricated plastic items aboard ships. (limit characters)
5. Lead groups of workers in the installation, removal, repair, and replacement of radiation shielding, hull damping, or insulation. (limit characters)
6. Advise design engineers on methods and techniques of composite or plastic manufacture and repair. (limit characters)
7. Assign work to junior composite or plastic fabricating employees by oral or written instructions. (limit characters)
8. Clean, strip, and otherwise prepare surfaces before application of plastic or rubber. (limit characters)
9. Instruct workers in the production of molds, patterns, forms, and jigs to create parts. (limit characters)
10. Lead coworkers in the use of thermoforming processing, casting, and laminating techniques for fabricating plastic or creating rubber molds. (limit characters)
11. Measure plastic compounds, silicones, and other components by weight according to specific formulas and instructions. (limit characters)
12. Use hand measuring devices (e.g., machinist scale, ruler, tape measure) to complete composite or plastic fabricating tasks. (limit characters)
13. Use measuring instruments (e.g., balance and gram scales) to weigh resins or other compound ingredients. (limit characters)
14. Guide workers in the interpretation of rough sketches, blueprints, and manufacturer specifications for repairing or manufacturing composites. (limit characters)
15. Interpret and apply written directives and other guidelines of the trade to fabricate materials. (limit characters)
16. Interpret instructions from supervisor to distribute composite or plastic fabricating workload to staff. (limit characters)
17. Set up, program, or operate computer controlled core-cutting or curing machines (e.g., heat blanket controllers) in accordance with specifications. (limit characters)
18. Use pneumatic die grinders, drills, sanders, hammers, rivet guns, routers, de-burring tool, heat guns, and vacuum techniques to make composite repairs. (limit characters)
19. Use routers, sanders, molds, or milling machines to shape, fabricate, or modify composite or plastic materials. (limit characters)
20. Use tooling and equipment (e.g., drills, caul plates, fixtures) to accomplish composite or plastic repair procedures. (limit characters)
21. Advise design engineers on material characteristics (e.g., strength, durability, cost, aerodynamics) that affect design specifications. (limit characters)
22. Assemble job materials needed to perform composite or plastic fabricating tasks specified in the production related work package. (limit characters)
23. Bond metal to composite materials or composite materials to metal to manufacture or repair items. (limit characters)
24. Determine the type of composite, plastic, or other compound to use based on project requirements. (limit characters)
Select “Yes” or “No” to the following question(s). (limit characters)
25. Do you certify that all of your responses to this questionnaire are true and accurate; and do you accept that if your supporting documentation does not support one or more of your responses to the questionnaire that your application may be rated lower or you may be removed from further consideration? (limit characters)